Functions

Functions in Kvaser Memorator

Triggers

Kvaser Memorator can log continuously, or logging can be triggered by external triggers (rising or falling edge) and/or by messages and signals on the CAN bus (triggered by identifier, or data contents.) Pre- and post-triggers are available. 

Filters

To enhance logging performance, Kvaser Memorator can filter out selectable messages to be logged. The identifiers can be picked from a database, or all messages can be logged.

Memory cards

Standard MMC or SD type flash memory cards can be used. Larger memory cards, up to 1 GB, can be used. See our support pages for more information.

Configuration software in the PC

• Configuration of the CAN controller, i.e. bit rate and filters.
• Configuration of the trigger conditions.
• Configuration of filter for messages to be stored.
• Configuration upload and download via USB.

Major Features

Major features of Kvaser Memorator

• One device for desktop and laptop.
• Quick and easy plug-and-play installation.
• Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
• CAN messages are time-stamped with 10 microseconds resolution.
• Large on-board RAM buffer for CAN messages.
• Supports ”listen-only” mode for bus analysis tools.
• Driver support for major operating systems.
• 100% compatible with applications written for Leaf, LAPcan, PCIcan, PCcan and USBcan with Kvaser’s CANlib.
• One SD/MMC connector that accepts SD or MMC flash disks, currently up to 1 GB. 
• One CAN connection ISO-11898 high-speed, 50kbit/s up to 1 Mbit/s (Philips TJA1050).
• Optional, second CAN connection that can be either high-speed (TJA1050), low-speed (Philips TJA1054), or single-wire (AU5790)
• One USB 1.1 connection (12 Mbit/s). This connection is compatible with USB 2.0.
• Power from CAN bus or from the USB side.
• Built-in real time (calendar) clock with battery backup.
• Logger status is indicated with four externally visible LEDs.
• Plastic housing with dimension W*L*H about 50*90*25 mm (circa 2 x 3,5 x 1 inch)

Software

Additional software and documentation

• Kvaser CANLIB SDK, which includes everything you need to develop software for the Kvaser CAN boards. Includes full documentation and many program samples, written in C, C++, Delphi, Visual Basic, and C#. All Kvaser CAN interface boards share a common software API. Programs written for one board type will run without modifications on the other board types!
• J2534 Application Programming Interface
• RP1210A Application Programming Interface
• On-line documentation in Windows HTML-Help and Adobe Acrobat format.
• Documentation, software and drivers can be downloaded for free at www.kvaser.com or purchased separately on CD if preferred.

• Here's a table showing the driver support.

• Download the User's Guide in PDF format.
• Download the product sheet in PDF format.
• Download Kvaser Memorator Product Comparison Table.
• Recommended flash disk types for the Kvaser Memorator Family

Application

Application Support

AFT MARC I™
ATI Apollo™
ATI CANlab™
ATI Vision™
Ficosa CANica™
Influx  Module Analyzer™
Kvaser CanKing™
National Instruments DIAdem™
National Instruments LabView™
Port CANopen Configuration™
PPE PCMSCAN™
TKE CANtrace™
TKE CANopen Configuration™
VAT 2000™
Vector CANalyzer™
Vector CANoe™
Vector CANape™
Warwick X-Analyser™
Xtm 

Platform

Supported Platform

Windows Vista,
Windows 2000/XP/Server 2003, Windows 98/ME, 
Linux (in USBcanII mode)