The Kvaser LAPcan II is a two-channel CAN interface for the PC card (PCMCIA) bus. It is equipped with dual Philips SJA1000 CAN controllers, and has a high performance microprocessor and memory architecture, as well as enhanced ESD robustness.
Major features -
Quick and easy plug-and-play installation -
The CAN drivers (DRVcans) are exchangeable; see below -
PC card (PCMCIA) type II, on-board C161 16-bit controller -
Ultrasonically welded card frame -
Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers -
Driver support for major Operating Systems -
Physical layer depends on the DRVcan type -
Large on-board RAM buffer for CAN messages -
Supports ”listen-only” mode for analyzing tools -
The on-board firmware will auto-detect the type of DRVcan
DRVcan – required cable, connector and CAN driver for LAPcan II -
For maximum flexibility and maintainability the CAN driver circuit is built into LAPcan II interface cables. Please see separate documentation of our DRVcans. -
The Kvaser DRVcans must be purchased separately and are not included with the LAPcan II. Note that one or two DRVcans are required to use the LAPcan II.
Additional software and documentation - Drivers for Windows 95/98/ME/NT 4.0/2000/XP/2003/Vista, Windows CE and Linux.
-
Kvaser CANLIB SDK, which includes everything you need to develop software for the Kvaser CAN boards. Includes full documentation and many program samples, written in C, C++, Delphi, Visual Basic, and C#. All Kvaser CAN interface boards share a common software API. Programs written for one board type will run without modifications on the other board types! -
J2534 Application Programming Interface -
RP1210A Application Programming Interface -
On-line documentation in Windows HTML-Help and Adobe Acrobat format. -
Documentation software and drivers can be downloaded for free at www.kvaser.com or purchased separately on CD if preferred.
Specifications General
Size
Voltage feed
Power consumption Connectors Controllers CAN drivers LAPcan family comparison |
PCCard (PCMCIA) Type II 85 x 53.5 x 5 mm
(approx. 3.4 x 2.1 x 0.2 in.) 5 V DC 110 mA 2 x 15-pin to DRVcan's 2 x SJA1000 (Philips) Depends on attached DRVcan
| | LAPcan model: DRVcan compatibility Enhanced real-time performance Enhanced driver library Superior EMC performance Extended OS compliance DRVcan hot-swap support | I x - - - - - | II x x x x x x | Kvaser LAPcan II (Item No. 00115-2) - Extensive software support
- High ESD performance
- PC card type II
- Two CAN channels
- Supports CAN 2.0A and 2.0B
- Exchangeable CAN drivers
- 32-bit high performance driver support
|
Shop 
Kvaser LAPcan II
