The Kvaser LAPcan is a two channel CAN interface for the PC card (PCMCIA) bus with two Philips SJA1000 CAN controllers. The CAN transceivers are built into the interface cables.
Major features - Quick and easy plug-and-play installation
- The CAN drivers (DRVcans) are exchangeable; see below
- Physical layer depends on the DRVcan type
- Ultrasonically welded card frame
- Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers
- The on-board firmware will auto-detect the type of DRVcan
- Driver support for major operating systems
- PC card (PCMCIA) type II, on-board C161 16-bit microcontroller
- Large on-board RAM buffer for CAN messages
- Supports ”listen-only” mode for analyzing tools
DRVcan – required cable, connector and CAN driver for LAPcan Software support - Drivers for Windows 95/98/ME/NT 4.0/2000/XP/2003/Vista, Windows CE and Linux.
- Kvaser CANLIB SDK, which includes everything you need to develop software for the Kvaser CAN boards. Includes full documentation and many program samples, written in C, C++, Delphi, Visual Basic, and C#. All Kvaser CAN interface boards share a common software API. Programs written for one board type will run without modifications on the other board types!
- J2534 Application Programming Interface
- RP1210A Application Programming Interface
- On-line documentation (in Windows Help and Adobe Acrobat format)
- Documentation, software and drivers can be downloaded for free from www.kvaser.com, or they can be purchased in CD if preferred. Updates to the software are regularly posted on the web.
Specifications General
Size: Power: Current consumption: Connectors: Internals
Processor: On-board
Memory: CAN
Controllers CAN Drivers: |
PCCard (PCMCIA) Type II
85 x 53.5 x 5 mm (approx. 3.4 x 2.1 x 0.2 in.)
5 V DC.110 mA (plus the current of the DRVcans) 2 x 15-pin PCMCIA I/O
connector (connects to the DRVcans) Infineon SAB C161, 16 MHz
128 kByte RAM, 256 kByte flash
2 x SJA1000 (Philips)
dependent of type of DRVcan | - AFT MARC I™
- ATI CANLab™ Network Analysis
- ATI VISION™ Calibration and Data Acquisition
- Ficosa CANica™
- Influx Module Analyzer™
- Kvaser CanKing™
- National Instruments DIAdem™
- National Instruments LabView™
- Port CANopen Configuration™
- PPE PCMSCAN™
- TKE CANtrace™
- TKE CANopen Configuration™
- VAT 2000™
- Vector CANalyzer™
- Vector CANoe™
- Vector CANape™
- Warwick X-Analyser™
- Xtm
- Windows Vista
- Windows XP/2000/Server2003
- Windows 95/98/ME
- Windows NT4
- Linux
Kvaser LAPcan (Item No. 00029-2) - Two CAN channels
- Supports CAN 2.0A and 2.0B
- Exchangeable CAN drivers
- PC card (PCMCIA) type II
- 32-bit high performance driver support
- Large on-board message buffer
|
Shop 
Kvaser LAPcan
